Refurbished
The deposit system is an internal, reusable system that refurbishes and repairs your used injectors to promote reuse and help reduce waste. Together we protect our environment. Further information can be found under the following link: about the deposit system
5x 1L Winter Diesel Fuel Additive Heating Oil MANNOL 9983 Flow Fit Additive
Technical data and description:
Product properties:
Prevents crystallisation of the paraffin contained in diesel fuel at low temperatures.
Reduces the maximum filterability temperature (down to -36 °C) and the solidification temperature (down to -47 °C) of diesel fuel.
Optimises and stabilises the operation of the fuel system at low temperatures, prevents clogging of filters and fuel lines with paraffin crystals.
Increases the completeness of fuel combustion and burns completely by itself, without forming carbon deposits and ash residues.
Makes it easier to start engines at low temperatures.
Contains cleaning agents that ensure the cleanliness of assemblies and fuel system parts.
Protects the fuel system from corrosion.
Neutralises water condensate in the fuel tank and thus prevents the formation of ice jams in the drive system at negative ambient temperatures.
Manufacturer number: 9983-025.
Manufacturer: MANNOL.
Shelf life: 5 years from production date.
Manufactured: in Europe.
Delivery quantity: 750 ml.
Recommended for regular use.
Delivery content: 3 pieces 250 ml will be delivered as shown on the product picture.
Application: Shake thoroughly before use. Add to the diesel fuel or directly into the fuel tank before each refuelling or immediately afterwards, starting in autumn, in a ratio of 1:1000 (250 ml anti-gel to 250 litres of fuel). Self-mixing.
Caution! Note: The additive freezes at low temperatures and only develops its full properties when mixed with diesel fuel. Due to the risk of freezing, the additive must not be stored at temperatures below 0 °C. When exposed to cold, it becomes solid and does not flow. In this case, it must be warmed to room temperature before it can be used again. The additive can only be added to the fuel in a liquid state.
Product safety
Danger
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Euro 6/VI diesel engines are efficient and clean—when all systems work together. But diagnostics can become expensive and frustrating when workshops rely on assumptions instead of measurements. One wrong assumption...
DieselFix Neuss |
Injector coding—whether it’s IMA-, ISA-, or QR-based calibration/correction codes—is often seen as the magic fix for diesel drivability problems. As soon as an engine runs rough or sets injector-related fault...
DieselFix Neuss |
One cylinder shows a fault, the workshop performs a single-injector replacement—and the vehicle goes back on the road. Yet only a few days later, the customer is back: the engine...
DieselFix Neuss |
Many Euro 6 diesel failures don’t start with “bad parts” — they start with water in the fuel. Modern common-rail systems rely on highly precise components operating under extreme pressure....
DieselFix Neuss |
Many “injector failures” are not caused by a defective injector — they are caused by contaminated diesel fuel. Because modern common-rail systems operate at extremely high pressure with microscopic tolerances,...
DieselFix Neuss |
In modern Euro 6/VI diesel engines, fuel injectors operate at extremely high pressure with incredibly tight tolerances. That’s exactly why diesel fuel quality is no longer a “nice to have”...
DieselFix Neuss |
Modern Euro 6/VI diesel engines are highly complex systems, packed with sensors, control units (ECUs) as well as sophisticated exhaust aftertreatment systems. Nevertheless, in the workshop the same core diesel...
DieselFix Neuss |
In modern diesel engines, the EGR (Exhaust Gas Recirculation) valve is undoubtedly one of the most important components for controlling NOx emissions. By recirculating a portion of the exhaust gases...
DieselFix Neuss |
Please wait...
